Yesterday we were running our Linuxcnc Routers, and the machine operator came and got me to tell me that one of them had crashed. Linuxcnc had exited in the middle of a run with the router motors still running in the material.
Here Is a Pastebin link to the error message. (My email to the list bounced with it as an attachment yesterday.) https://pastebin.com/K8BNpku5 I believe that Linuxcnc had been up and running for quite a while (possibly weeks or months) since it had been last restarted. And I believe that one or more system updates had been performed while Linuxcnc was running (The error message says Linuxcnc ver. 2.7.14-57... but Synaptic said the current installed version was 2.7.14-62...) The error message screen is quite long with lots of insignificant errors, and I'm not sure what may have been the real cause of why it shut down. If anyone can see or can tell me where to look for what the real source of the shutdown was I'd like to know what may have been going on. I ran another system update and restarted Linuxcnc and it has been running fine since. Todd Zuercher P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php> 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
