On Fri, 16 Aug 2019 at 13:36, andrew beck <andrewbeck0...@gmail.com> wrote:
I just wondered what is involved in changing to 2.8 and is there a iso that > I can just flash the computer with or do I have to build from source. as I > saw 2.9 is out now so I guess 2.8 must be getting a lot of use. > The easiest way to get 2.8 is to ass the buildbot rpositories to Apt / Synaptic: http://buildbot.linuxcnc.org > I was wondering what is the best way. I wrote the "carousel" component to be the best way, and it probably is for some systems. It certainly seems to work well for a number of lathe turrets. For a mill you typically need to combine carousel for turret motion with a remapped M6 and a G-code subroutine to handle the required axes motions to pick up and drop tools. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users