REAL SORRY AT ALL ..... ABSOLUTE PATH IS THE PROBLEM .... THE RIGHT COMMAND FOR OUTPUT (test1) OF position_logger.cc WAS:
bkt@bkt:~$ '/home/bkt/linuxcnc-dev/test1' '/home/bkt/linuxcnc-dev/configs/common/linuxcnc.nml' regards and Happy End Of Year Holiday!! bkt Il giorno sab 14 dic 2019 alle ore 09:24 theman whosoldtheworld < bleachk...@gmail.com> ha scritto: > About position_logger.cc and my bad memory .... if I use xemc as nmlfile > obtain these error: > > bkt@bkt:~/linuxcnc-dev$ '/home/bkt/linuxcnc-dev/lib/logger' xemc > libnml/cms/cms_cfg.cc 623: cms_config: can't open 'xemc'. Error = 2 -- No > such file or directory > libnml/nml/nml.cc 370: NML: cms_config returned -1. > > ********************************************************** > * Current Directory = /home/bkt/linuxcnc-dev > * > ********************************************************** > * BufferName = emcStatus > * ProcessName = xemc > * Config File = xemc > * error_type = 0 (NML_NO_ERROR) > ************************************************************ > > obviously a linuxcnc Axis gui is open in my desk .... > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users