I don't know if it is ok to post a screenshot here, but this is what I
get to see in Debian (see attached).
Also, in linuxcnc, can I use two different parallel ports and hook a
mill up to one and a lathe to the orher and use
either one in linuxcnc (or does that mean I need to configurations, one
for each specific parallel port?)
thanks,
Ron
On 12/15/19 3:50 PM, Thomas D. Dean wrote:
On 12/15/19 11:53 AM, andy pugh wrote:
On Sun, 15 Dec 2019 at 19:39, R C <cjv...@gmail.com> wrote:
That was a couple of weeks ago, mayb even 2 months.
The Wheezy ISO was updated to reference the archive repository on the
24th
of May. It sounds like your download was comfortably after that.
So that seems to indicate that the repository fix did not work. Which is
odd, as (and others) tested it.
I downloaded and installed ten days ago. The install went without
hitch.
> ls -l *.iso
-rw-r--r-- 1 tomdean tomdean 1212776448 Oct 28 19:44
linuxcnc-2.7.14-wheezy.iso
> sha256sum *.iso
079ba1fae48861b0814187b8048d6f2f299f943427d8c4806b65519f3a560d48
linuxcnc-2.7.14-wheezy.iso
Tom Dean
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
