Odd, Stepconf ran fineon the one I did. Dave
On Thu, Dec 19, 2019, 21:54 R C <cjv...@gmail.com> wrote: > because a bunch of people were recommending it. > > Also, I managed to install "LinuxCNC Uspace 2.7.0 Debian 9 Stretch" > <http://www.linuxcnc.org/testing-stretch-rtpreempt/> > > > BUT: there are two issues with that. > > > 1: It does not want to install if there is more than one drive in the > system, which I can dodge by turning other drives off in the BIOS > > > 2: There are issues with pyton, it is trying to use something that is > not there, files missing, when I start the "stepper config" > > > Ron > > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users