> On 30 Dec 2019, at 10:57 am, Dave Matthews <n36...@gmail.com> wrote:
>
> I am setting up a new machine to replace the 2.8 install that I am
> currently using. The machine that I am currently running is on its
> way out. I have a 2.7 install using the live cd install in downloads.
> Install was done no network because the installer didn;t like the
> network dongle. I have since dug through my pile of cards and found a
> wifi card that the machine is happy with. 2.7 launches as expected
> and the machine has been updated to current Deb 9.
>
> uname gives Linux localhost 4.9.0-8-rt-amd64 #1 SMP PREEMPT RT Debian
> 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux
>
> I am trying to use the instructions on the LinuxCNC buildbot page
> http://buildbot.linuxcnc.org/ in hopes that I can find a 2.8 in there.
> I read that Master is now on 2.9 and I would prefer to be a little
> more on the stable side and use the configs from the old 2.8 machine.
>
> I installed the dependency fail for the sudo apt-key adv --keyserver
> hkp://keys.gnupg.net --recv-key EF1B07FEE0EE663E step. When I try to
> install the key I get:
> Executing: /tmp/apt-key-gpghome.RJo9NWtHgB/gpg.1.sh --keyserver
> hkp://keys.gnupg.net --recv-key EF1B07FEE0EE663
> gpg: "EF1B07FEE0EE663" not a key ID: skipping
>
you are missing the "E" at the end
> and there is no /etc/apt/sources.list.d/linuxcnc-buildbot.list created.
>
> I created the file and added the 2.7 entries and edited them to 2.8.
> That got me an install of the 2.8 docs but nothing else.
>
> I don't remember what incantations I did to install 2.8 on the old
> machine. I think it was just pointing at repositories and using
> apt-get.
>
if you created /etc/apt/sources.list.d/linuxcnc-buildbot.list then check your
/etc/apt/sources.list file and comment out any lines that reference linuxcnc
> Any hints please?
>
> Dave
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
