i have run several machines through vncviewver server from realvnc, and done debug several miles away. DO IT! In the past I tried to evangelize many people into LINUXCNC, but the windows virus does not cure easily. Regards Rick
El mar., 21 ene. 2020 a las 19:34, Rafael Skodlar (<[email protected]>) escribió: > On 2020-01-21 13:08, Todd Zuercher wrote: > > Correction on my cable lengths, I was thinking 30ft which is about 10m > not 3 (transposed the 1 and the 3 in my head.) > > > > Todd Zuercher > > To make it through my DIY projects I had to install a conversion app to > handle fractions, F, and such on my PDA. Sad state of the Union. > > ... snip > > -----Original Message----- > > From: Todd Zuercher > > Sent: Tuesday, January 21, 2020 4:04 PM > > To: Enhanced Machine Controller (EMC) <[email protected]> > > Subject: RE: [Emc-users] X forwarding with linux-cnc > > > > Cable and wiring needs will vary from application to application, but > where I've had to replace machine cabling I have usually used Igus' > Chainflex cables. But I'm generally working with large cnc routers with > long cable runs (3m or so) and a lot of long moving cable chains where good > long-term flexibility is a must. > > > > PS if you can buy your encoder cables pre-made it is usually worth the > extra cost. Hand crimping (or worse soldering) those tiny high wire count > cable ends is a pain in the...) > > > > Todd Zuercher > ... > > I appreciate your pointer to what I was looking for. The cost seems to > be reasonable. Some encoders I've seen come with connectors that are not > too hard to connect to cables. > > I don't mind soldering though. I've done it thousands of times when 50 > or 100 pairs phone cables needed to be connected in cable racks for the > phone company for my intern job. Here in the US it's not done that way. > They must be afraid of burning their fingers ;-) > > SMT components are now a challenge for me. My eyes have seen too many > small things and need magnification for small parts/print ;-) > > Thanks to you guys there is hope for me to build something. > > -- > Rafael Skodlar > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
