To deal with probe tip, probe the perimeter, connect the dots, then just offset the shape you made with the probe's tip radius.
Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: andy pugh <bodge...@gmail.com> Sent: Tuesday, February 04, 2020 12:31 PM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Probing a Profile [EXTERNAL EMAIL] Be sure links are safe. On Tue, 4 Feb 2020 at 16:22, dave engvall <dengv...@charter.net> wrote: > I've done it the hard way by drawing circles the diameter of the probe I can handle that, at a push. But what did you use to control the probing process? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users