> -----Original Message----- > From: andy pugh [mailto:[email protected]] > Sent: May-29-20 1:48 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] On Motorizing a BS-1 clone > > On Fri, 29 May 2020 at 21:10, Lawrence Glaister <[email protected]> wrote: > > > > > Using linux, I use the following tools: > > stl gcode usb serial > > OPENSCAD --> CURA --> REPETIERHOST --> 3D printer > > design cam stream gcode to machine > > > > I use Octoprint, running on a Pi inside the printed case. It gives me a > Wifi connection to the printer and a webcam and control interface that I > can see from any web browser on the house network.
Me too. Mine's a Pi2 now wired rather than WiFi. Over the last year the number of WiFi devices out there has gone up by almost a factor of 10 and I found I'd lose video feed. Now with a wired connection I can use Octoprint and watch. John Dammeyer > > But, to start, I would suggest CAD -> STL on SD card and walk that to the > printer. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > � George Fitch, Atlanta Constitution Newspaper, 1912 > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
