On 6/25/20 10:43 AM, Martin Dobbins wrote:
I'm trying to use this on Ubuntu 20.04 because I'm looking to write some g code for a tiny (Roland) drag knife, I wanted to see how it handled corners.Unfortunately, while the gui will load OK when I try to load a dxf I'm getting a runtime error: File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 609, in abs_iter raise StopIteration() StopIteration The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/bin/dxf2gcode", line 727, in open self.load() File "/usr/bin/dxf2gcode", line 874, in load self.makeShapes() File "/usr/bin/dxf2gcode", line 922, in makeShapes self.makeEntityShapes(self.entityRoot) File "/usr/bin/dxf2gcode", line 973, in makeEntityShapes self.makeEntityShapes(newEntityContent, ent_geo.Layer_Nr) File "/usr/bin/dxf2gcode", line 996, in makeEntityShapes tmp_shape.AnalyseAndOptimize() File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 175, in AnalyseAndOptimize self.setNearestStPoint(Point()) File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 190, in setNearestStPoint min_geo_nr, _ = min(enumerate(self.geos.abs_iter()), RuntimeError: generator raised StopIteration Any ideas for a fix? This was supposed to be a quick project.
That looks like a bug in dxf2gcode. Can you post the DXF file that causes the problem?
-- Sebastian Kuzminsky _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
