Just found a YouTube video about that, problem solved-maybe. Thanks, Todd https://www.youtube.com/watch?v=40CRimcwAZo
Martin ________________________________ From: Todd Zuercher Freecad's g-code tools also includes drag-knife dress-ups. I haven't tried to use them but think I'm about to. (I have to set up some tool paths for a glass cutting head we just purchased (which is more or less a drag-knife.) Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: Martin Dobbins <tu...@hotmail.com> Sent: Thursday, June 25, 2020 2:23 PM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] dxf2gcode [EXTERNAL EMAIL] Be sure links are safe. I really like openscad, and the uphill struggle with Freecad has just begun to get easier. I had no idea that Freecad could make g code until Todd just told me 🙂 The beginning of this video has a pretty good illustration of how a drag knife works (it's different): https://www.youtube.com/watch?v=8jHS2uZpfJg ________________________________ From: Glenn Edwards All, I have purchased Q-Cad recently, the DXF portion is free and the CAM costs extra, and have found the DXF editor pretty good. I have struggled with the CAM portion that does the DXF to G-code, however. It does not seem well supported- email inquiries go unanswered. My two-cents. Best regards, -- -- Glenn Rapid Converting LLC gl...@rapidconverting.com www.rapidgasket.com<http://www.rapidgasket.com> On Thu, Jun 25, 2020 at 10:47 AM Todd Zuercher <to...@pgrahamdunn.com> wrote: > Freecad can make G-code directly, leaving out the DXF middle man. > Have you tried that? > > Todd Zuercher > P. Graham Dunn Inc. > 630 Henry Street > Dalton, Ohio 44618 > Phone: (330)828-2105ext. 2031 > > -----Original Message----- > From: Martin Dobbins <tu...@hotmail.com> > Sent: Thursday, June 25, 2020 1:34 PM > To: Enhanced Machine Controller (EMC) > <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] dxf2gcode > > [EXTERNAL EMAIL] Be sure links are safe. > > I've tried two coming from Freecad, both saved as "Autocad dxf", one > was a simple 2D fully constrained 20mm square and the other was the > same thing padded to a thickness of 0.254 mm. I can try a dxf from > another source if that is the problem. > > Martin > > > > ________________________________ > From: Sebastian Kuzminsky > > On 6/25/20 10:43 AM, Martin Dobbins wrote: > > I'm trying to use this on Ubuntu 20.04 because I'm looking to write > > some > g code for a tiny (Roland) drag knife, I wanted to see how it handled > corners. > > > > Unfortunately, while the gui will load OK when I try to load a dxf > > I'm > getting a runtime error: > > > > File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line > > 609, > in abs_iter > > raise StopIteration() > > StopIteration > > > > The above exception was the direct cause of the following exception: > > > > Traceback (most recent call last): > > File "/usr/bin/dxf2gcode", line 727, in open > > self.load() > > File "/usr/bin/dxf2gcode", line 874, in load > > self.makeShapes() > > File "/usr/bin/dxf2gcode", line 922, in makeShapes > > self.makeEntityShapes(self.entityRoot) > > File "/usr/bin/dxf2gcode", line 973, in makeEntityShapes > > self.makeEntityShapes(newEntityContent, ent_geo.Layer_Nr) > > File "/usr/bin/dxf2gcode", line 996, in makeEntityShapes > > tmp_shape.AnalyseAndOptimize() > > File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", > > line > 175, in AnalyseAndOptimize > > self.setNearestStPoint(Point()) > > File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", > > line > 190, in setNearestStPoint > > min_geo_nr, _ = min(enumerate(self.geos.abs_iter()), > > RuntimeError: generator raised StopIteration > > > > Any ideas for a fix? This was supposed to be a quick project. > > That looks like a bug in dxf2gcode. Can you post the DXF file that > causes the problem? > > > -- > Sebastian Kuzminsky > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users