A lengthy delay is definitely not my experience. I boot from a SSD and the
entire startup process is definitely takes less than a minute.
> -----Original Message-----
> From: John Dammeyer [mailto:jo...@autoartisans.com]
> Sent: Monday, July 06, 2020 4:52 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] PCIe vs Ethernet Mesa card?
>
> > From: andy pugh [mailto:bodge...@gmail.com]
> > On Mon, 6 Jul 2020 at 21:22, Chris Albertson <albertson.ch...@gmail.com>
> wrote:
> > >
> > > Is there any advantage to using a bus connected Mesa card like the
6i25 vs
> > > using one of the Ethernet-connected cards such as 7i92M or 7i93
> >
> > PCI might be more reliable. Not so much during runs, but at startup.
> > It is quite easy to imagine something changing the network setup of
> > your machine, and finding that you just can't get it to run.
>
> No experience with the PCI cards but what I have noticed with my 7i92H is
> that after I boot and sign on into Linux it's important that I go and do
> something else for a few minutes.   Then come back and click on the icon
that
> runs the actual LinuxCNC Axis program that uses the HAL file for the
7i92H.
>
> Seems otherwise the Ethernet connection to the 7i92H can't be found for
the
> first few minutes.
>
> There may well be some parameter that can be set so the 7i92H Ethernet
> connection happens faster.
>
> John
>
>
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users




_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to