I am not using linux cnc, I am just 'driving' the stepper drivers
with a raspberry pi
I figured, same hardware (drivers, motors), "Linux CNC" can use it, so
thought I'd just ask here about the internals/specifics and how to use it.
On 7/9/20 1:44 PM, andy pugh wrote:
On Thu, 9 Jul 2020 at 19:26, R C <cjv...@gmail.com> wrote:
The stepper motors I use with a stepper driver, those common DM542 ones,
the stepper motors themselves are 2A and 1.8 degrees per step.
...
As with PWM itself, I am probably just not too familiar with it.
Do you mean PWM?
Stepper drivers take step and direction, not PWM.
I think this is a job for an Arduino, rather than LinuxCNC.
Especially as I assume that an equatorial mount runs at an absolutely
constant rate anywhere in the world?
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
