On Sunday 06 September 2020 12:56:33 Tom Smart wrote: > Just be careful of that stuff it is carcinogenic because the body > can't absorb the ceramic if it is inhaled into the lungs. I once > purchased a similar material called super wool that is made from all > natural fibers so it isn't carcinogenic.
Good to know & thanks for the reminder. Haveing been in broadcasting for 50+ years, I am well familiar with the ceramics used in high power vacuum tubes, and all the warnings that tell you to bend over and kiss it goodbye, you're gone if you ever inhale any dust from the breakage of that berylium oxide compound. Some of it is dyed pink to get your attention, but there's tons of the white stuff too. All very dangerous if abraded. My main concern is that there isn't room under the plate on an ender 3 for even the 1/2" thick stuff. Its pretty busy underneath that plate. 1/4" would be a heck of a lot easier to find room for. But I didn't see any that thin in the search results. This would be a great place for some spray on foam, but I don't think hi temps and that stuff are on speaking terms. Thank, Gene _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users