On Sunday 18 October 2020 17:44:24 Thaddeus Waldner wrote:

> https://www.pololu.com/file/0J52/vnh2sp30.pdf
> <https://www.pololu.com/file/0J52/vnh2sp30.pdf>
>
> Page 10, center table. Tr is rise time, Tf is fall time. The diagram
> on figure 5 two pages down shows the timing as coinciding with and
> measured from with the PWM signal coming in.

I read that, but the top waveform  on page 13 doesn't show that.  So much 
for accurate pdf's I guess. :(

> Also on the first page:
> "In all cases, a low level state on the PWM pin will turn off both the
> LSA and LSB switches. When PWM rises to a high level, LSA or LSB turn
> on again depending on the input pin state."

Anyway, I have 2 of those coming, and 2 of the 420 watt audio boards 
coming, and 1 150 watt audio board coming. The audio boards will need to 
have the input caps replaced by a wire jumper, and possibly even a bias 
summing point for best operation.  They are also buckets faster.
 >
> > On Oct 18, 2020, at 4:28 PM, Gene Heskett <ghesk...@shentel.net>
> > wrote:
> >
> > On what page do you see that, Thaddeus?
>
Thanks Thaddeus.
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>


_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to