I definitely would like to set up a configuration with Andy's stuff and
ply with it.
Andy, if you see this: What goes where, if I'd set up a new lathe
configuration as in this page;
http://www.bodgesoc.org/lathe/lathe.html
Ron
On 11/4/20 3:08 PM, Mark Johnsen wrote:
Andy Pugh (and others) can answer this better than I can, but here's a link
to Andy's website on using the lathe:
http://www.bodgesoc.org/lathe/lathe.html
On the above page, he has links to the actual programs, here's one for
turning:
http://www.bodgesoc.org/lathe/turning.ngc
There are more on that first page. I don't have a linuxCNC lathe, but I'd
use the above examples and then look at the LinuxCNC programming
Here's content about a sherline lathe from the sherline website:
https://sherline.com/wp-content/uploads/2017/08/linuxcnc_help.pdf
Here's a linuxcnc forum discussion that might be useful as well
https://forum.linuxcnc.org/31-cad-cam/487-lathe-programming?lang=fr&start=10
No program, but lathe setup info:
http://linuxcnc.org/docs/html/lathe/lathe-user.html
Good luck,
Mark
On Wed, Nov 4, 2020 at 1:52 PM R C <cjv...@gmail.com> wrote:
Hello,
I don't know if this is a topic for this list, but trying to learn how
to write a 'simple' canned cycle g-code program
basically to learn how to get started.
let's say I want to make a simple shaft, stock is a little over 0.25",
and want one half of it to be 0.25" and the other half 3/16"
(Earlier I was looking for an online script or so that can do that).
Is there a beginners guide/course that walks you through this with
simple examples? (maybe I should say trivial examples, let's just
assume I know next to nothing about machining.) Are there some examples
to look at, play with? I have a small sherline lathe I want to work with.
thanks,
Ron
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users