Hi Andy,
On 11/4/20 5:31 PM, andy pugh wrote:
On Wed, 4 Nov 2020 at 22:11, Mark Johnsen <m...@ijohnsen.com> wrote:
Andy Pugh (and others) can answer this better than I can, but here's a link
to Andy's website on using the lathe:
http://www.bodgesoc.org/lathe/lathe.html
That's pretty old now. If you have the latest LinuxCNC (2.8) then take
a look in the sample configs, particularly
sim/gmoccapy/lathe_configs/lathe_macros for a ready-to-run config
using these macros:
https://forum.linuxcnc.org/41-guis/26550-lathe-macros?start=150#82743
Currently I am using axis 2.7.15, I would like to try that. I am
planning on building another machine for this later (with the newest
linuxCNC)
Is it a lot of work to still try the "pretty old" stuff?
thanks,
Ron
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
