Let's say you wanted to access the hal pins and essentially run the machine using a different programming language like C instead of python.
How's the linkage done from say the Axis GUI to the rest of the system? Like Spindle ON button and then Spindle + John > -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: December-15-20 5:15 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Python question > > On Wed, 16 Dec 2020 at 01:10, <ken.stra...@gmail.com> wrote: > > > > Are the necessary environment variables document somewhere? > > I think you just need to "import linuxcnc" to get access to linuxcnc > command and state. > > But you would probably still need to create and net hal pins to get > values from hal. > > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > � George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
