How useable are Fanuc's servos and amps with Linuxcnc? My understanding is that it is very involved to try to force them to work with anything other than a Fanuc control, if it is even possible. With the newer it is the worse it gets. What is the current lowdown on this exactly, approximately what age or amp models are impossible. For the ones that are possible, how workable are they really. I've seen some theoretical discussions, of how some of them might be controlled, but no real proof of how well it actually works in practice.
Or are we still at the point on a 20 year old machine we want to refit for use in a production factory setting, where we are best off stripping every thing with a Fanuc label off, reselling what we can on ebay, and buying something more generic to replace it with (or sticking with Fanuc)? Todd Zuercher P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php> 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
