On Wed, 2 Jun 2021 at 05:50, andrew beck <andrewbeck0...@gmail.com> wrote: > > Never used the Mach ones. But anything like the path pilot stuff. > > Eg profile cycles > Parting > Facing > Threading > Taper threading > Tapping > Grooving > Straight Turning
Have you seen: https://forum.linuxcnc.org/41-guis/26550-lathe-macros?start=150#82743 Shown in action making a part here: https://youtu.be/nIYMfyf4jDI I use them for more than 90% of the stuff I make. I have to be making dozens of somethin, or have unusually complex curves, to bother with actual G-code programs. The zip file in the forum post should be all ready to go in Touchy. They are also available in a Gmoccapy sample config in the standard install. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users