https://www.intertek.com/field-labeling/
If moving the mill out for re-inspection or other plans fail. On 7/28/21 2:14 PM, Ralph Stirling wrote:
I'm in a bind now. I just had the electrical wiring I put into my garage shop inspected. The WA state inspector liked my wiring fine, but balked at the non-UL-listed CNC mill (the main point to my whole garage shop project). He insists it get stamped by one of the *seven* official "approved engineers" for the state of WA before he can sign off on my electric. I suspect that the field approval would cost considerably more than my entire mill (1998 vintage French 5hp spindle, 300x200x300mm travels, $5K). Didn't matter to him that the new VFD is listed. Any other US-based, especially WA-based LinuxCNC retrofitters faced this problem successfully? Thanks, -- Ralph _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
