Yep g64 p. 01. This is a high speed vmc so I can't really afford to blend the path more than this
On Tue, Aug 17, 2021, 3:48 PM Curtis Dutton <curtd...@gmail.com> wrote: > Are you using any G64 P- Q- path blending? > > On Mon, Aug 16, 2021, 11:19 PM andrew beck <andrewbeck0...@gmail.com> > wrote: > > > hey guys > > > > I am sitting here watching my cnc mill atm its shaking quite a bit > > acceleration is 600mm/sec2 which is not that high i think. compared to > > every other cnc mill i have used with a commercial controller. they have > > jerk control and work much better. so looking forward to when we get > jerk > > control here on linuxcnc! > > > > but in the mean time i need a poor mans jerk control and thinking of a > > limit on the pid output to chop down the initial acceleration for the > first > > moment in time just so little moves don't shake it to death > > > > andy mentioned that I could maybe use a limit component to limit the > > initial acceleration for the first tiny moment in time to cut down on the > > vibrations. > > > > how do you guys think that could work? > > > > Regards > > > > Andrew > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
