It's pretty much a slightly beefier haas vf2 This is a chevalier 2040 vmc
On Tue, Aug 17, 2021, 3:53 PM andrew beck <andrewbeck0...@gmail.com> wrote: > Yep g64 p. 01. > > This is a high speed vmc so I can't really afford to blend the path more > than this > > On Tue, Aug 17, 2021, 3:48 PM Curtis Dutton <curtd...@gmail.com> wrote: > >> Are you using any G64 P- Q- path blending? >> >> On Mon, Aug 16, 2021, 11:19 PM andrew beck <andrewbeck0...@gmail.com> >> wrote: >> >> > hey guys >> > >> > I am sitting here watching my cnc mill atm its shaking quite a bit >> > acceleration is 600mm/sec2 which is not that high i think. compared to >> > every other cnc mill i have used with a commercial controller. they >> have >> > jerk control and work much better. so looking forward to when we get >> jerk >> > control here on linuxcnc! >> > >> > but in the mean time i need a poor mans jerk control and thinking of a >> > limit on the pid output to chop down the initial acceleration for the >> first >> > moment in time just so little moves don't shake it to death >> > >> > andy mentioned that I could maybe use a limit component to limit the >> > initial acceleration for the first tiny moment in time to cut down on >> the >> > vibrations. >> > >> > how do you guys think that could work? >> > >> > Regards >> > >> > Andrew >> > >> > _______________________________________________ >> > Emc-users mailing list >> > Emc-users@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/emc-users >> > >> >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
