On 8/11/22 23:05, gene heskett wrote:
On 8/11/22 14:04, Chris Albertson wrote:
You designed something you can't print? Post the STL or better, the STEP
file.
On Thu, Aug 11, 2022 at 10:57 AM gene heskett <ghesk...@shentel.net>
wrote:
On 8/11/22 12:45, Chris Albertson wrote:
If you need to make a cable bundle stiffer, Place a flexible
plastic rod
inside the bundle. This works better than using a stiff jacket.
If you
cut up an earphone cable or maybe a mouse cable, many times you see a
plastic filament inside to make the cable stiffer and have better
handling. I think getting this right is more an art than an
engineering
exercise. Sometimes I like the spiral stuff better than the split
tube
but it depends on the use case.
I think you are going to have to design and print connectors or stain
relief fittings. Maybe a combination of PLA shells and TPU
liners? Or
jut the TPU liners used with hardware store parts
On Wed, Aug 10, 2022 at 2:19 PM gene heskett <ghesk...@shentel.net>
wrote:
The gizmo I made, printed in tpu might be a better part for this.
Provided I can superglue it to the redesigned J-box I can't make.
I can't make it because of the uncontrollable over flow a bondech LGX
extruder on top of a Mosquito hot end is outputting enough plastic to
make the purge line laid at startup, about 3mm wide and a mm+ deep.
And no value for an M92 E<value in steps> "415" recommended by
bondtech, makes any difference. M503 C is supposed to generate a
zip on the SD card containing all those settings. doesn't work. Ack the
docs of Marlins site it should.
I've tried all the way down to 50 with no visible complaints, and no
effect on the overflow. So I'm trying to turn down cura-5.1, and just
found 50%
isn't enough, 75% is next.
My yard is about 9" overdue for a haircut, so after I give prusa and
bondtech
a piece of my mind I can spare, and the weather is momentarily dry,
I'll go
do the yard.
Burnout I think is the word.
And after putting prusa's firmware back in it, then verifying that
bondtechs version of M92 E412 was actually correct, feeding 99 mm of
filament for s 100mm command, trying the new alpha driver from prusa,
but this one won't even ack that a .3mf has been loaded,
And at 5am, its 10mm up, no further increase in the crash count, still
looking great. cura says its 41% done...
Take care & stay well, Chris.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
