trešd., 2026. g. 14. janv., plkst. 15:46 — lietotājs andy pugh (<[email protected]>) rakstīja: > > On Wed, 14 Jan 2026 at 12:46, Viesturs Lācis <[email protected]> wrote: > > > Now I have a question about motion.spindle-on pin on version 2.7 - > > that HAL pin does not turn on from M03 command in g-code or MDI > > I have a feeling that that pin needs both an M3 and a non-zero S > command to activate. >
Thank you all for the reminder, I really did not have specified S word. In the meantime I got solution by linking the output pin to halui.flood.is-on and using M8/M9 commands in g-code. Does it behave like this in actual version as well? It does not make really much sense as there are different tools that need to be turned on/off without actually controlling their speed/power from g-code, but this is not that important. In case anyone is interested in more details of what I am doing: I built C axis attachment for my old router and put a manual foam cutting tool (meant to be hand-held) from aliexpress. The idea is to cut grooves in extruded xps boards for underfloor heating (a little mistake in planning results in a need for heated floors in second floor of the house). Basically I want to diy these boards (I already have the aluminium heat spreader plates, got directly from manufacturer in Poland): https://banarta.com/product/underfloor-heating-panel/ Did some testing today: https://www.youtube.com/shorts/-WwzN4Nq1yM Thanks Gene for giving me a solution with this existing somewhat malfunctioning setup! Viesturs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
