svētd., 2026. g. 11. janv., plkst. 00:12 — lietotājs gene heskett (<[email protected]>) rakstīja: > > Considering that most of that style SSR's trigger on less than 5 mills, > I might put a 100 ohm R in the - line from your board. >
Thank you Gene! Did this (added 100 ohm resistor) and the SSR works! Now I have a question about motion.spindle-on pin on version 2.7 - that HAL pin does not turn on from M03 command in g-code or MDI although Axis GUI in Manual tab will have spindle forward button pressed. But actually pressing that button (or hitting F9 on keyboard) does turn on the motion.spindle-on pin. It makes me think that I am missing some connection or parameter in HAL file, but I could not find anything in docs. According to this page, IMHO it should be sufficient: https://linuxcnc.org/docs/2.7/html/examples/spindle.html I will appreciate any suggestions of what have I overlooked. Viesturs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
