I would have zero fear. If Linux doesn't have current drivers, it will soon have them. As for 10 point touch screens, LinuxCNC works just fine with single point touch screens.
On Thu, Feb 12, 2026 at 11:10 AM John Dammeyer <[email protected]> wrote: > HI all, > This popped up on my amazon feed. > > https://www.amazon.ca/InnoView-Portable-Touchscreen-10-Point-Protective/dp/B > 0DFLZTG9W/ref=sr_1_6?th=1 > <https://www.amazon.ca/InnoView-Portable-Touchscreen-10-Point-Protective/dp/B0DFLZTG9W/ref=sr_1_6?th=1> > > > Listed as 15.6" 1080P with 10 point touch screen. Is something like this > usable with LinuxCNC and one of the Touch Screen interfaces? > Thanks > > John > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
