> -----Original Message----- > From: Oliver Dippel via Emc-users [mailto:[email protected]] > Sent: February 12, 2026 9:16 AM > To: [email protected] > Cc: Oliver Dippel > Subject: Re: [Emc-users] Touch Screen Monitor > > On 2/12/26 18:04, John Dammeyer wrote: > > HI all, > > This popped up on my amazon feed. > > https://www.amazon.ca/InnoView-Portable-Touchscreen-10-Point- > Protective/dp/B > > 0DFLZTG9W/ref=sr_1_6?th=1 > > > > > > Listed as 15.6" 1080P with 10 point touch screen. Is something like this > > usable with LinuxCNC and one of the Touch Screen interfaces? > > Thanks > > > > John > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > yes, but with single touch, works out of the box. > > multitouch maybe possible with manual configuration >
Thanks. The reason I ask is I have a 10.1 touch screen I bought to go with the Pi-4 and MESA 7i92H. Running the gmoccapy screen I find the buttons are too small. Even the text is too small. Although 15" is bigger I'm wondering if the minimum easily and comfortable usable size for a touch screen and one of the touch interfaces (as opposed to AXIS) needs to be 20". I also recall that the capacitive touch screens are not as effective for the LinuxCNC environment. John _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
