----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Syd, Those drag elements don't sound like enough to account for a 47% increase in fuel consumption. Overly rich mixture on his engine (or overly lean on yours) or both might account for a big portion of the difference. 4.25 versus 6.25 is a BIG difference. Ed Burkhead http://edburkhead.com/ [EMAIL PROTECTED] -----Original Message----- From: Sydney Cohen [mailto:[EMAIL PROTECTED] Sent: Thursday, June 26, 2003 9:48 PM To: Greg Bullough Cc: [EMAIL PROTECTED]; Coupe-List Subject: Re: [COUPERS-FLYIN] morning group Hi Greg, Dennis' Coupe has more drag due to two large venturis as opposed to one small one on mine; landing lights on the gear legs, and I have none; a bubble windshield and mine is flat; more antennas than mine; and no nose gear fairing, but I have one. Also, in order to go the same airspeed with the added drag, he would have to be turning more rpm. I believe his tachometer reads low, maybe 100 rpm or more. Neither of us leaned, and he didn't follow directly behind me, so I don't think he was making a lot of power adjustments. I think the drag is the reason. I don't know his empty weight, but remember, I was carrying a passenger and he was not. His carburetor could be set richer too. No, I don't have an EGT, but have had no problems with valves or oil temps. In fact, my oil temps were usually about 10 degrees less than Dennis'. Syd Greg Bullough wrote: > At 10:46 PM 6/25/2003 -0500, Sydney Cohen wrote: > >> We both have D models, both have 85 hp engines, both have 71 x 48 >> props, both ran 2450 rpms, both flew at the same airspeed (we were >> together) and I had a passenger and Dennis didn't. Explain that one >> if you can. I can't. But I'm happy. :-) > > > There can be one and only one explanation...Dennis is running a richer > mixture. > > Probably richer than necessary. That said, 4.25 gph at cruise is > suspiciously towards > the lean side of things except at 10,000 feet. Do you have an EGT? > > Greg > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
<<attachment: winmail.dat>>
