I think I've almost got my AX5203 going, but I hit a big snag: The drive
came (from eBay) with a TwinSAFE option card: AX5801
When I try to take the drive out of PREOP, I get an error on the LCD:
FDD4 - "Configured safety option don't match" (suffered in translation)
So I powered down, removed the option card, and restarted. An error is
immediately displayed on the LCD:
FC0C - "Safety card activated"
An odd message because the card is removed. At this point, the drive
doesn't respond to IDNs. I have to re-install the card to talk to the
drive. There is an IDN:
P-0-2000 Configured safety option
I tried setting that to zero, but it didn't seem to have any effect and
the setting doesn't survive a power cycle.
How can I get rid of the AX5801 so the drive will operate?
Thanks in advance.
-Hugh Sparks
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
