Slidely offtopic: Beckhoff AX5000 runs with Sercos-Over-Ethernet-Profile? Does it support Ethernet-Over-Ethercat? Did you have any problems?
Mit freundlichen Grüßen / Best Regards i.A. Daniel Koch Elektronik/Software ------------------------------------------------------------------------------------------------------------------------------------------------ Paul Maschinenfabrik GmbH & Co. KG Max-Paul-Str. 1 | 88525 Duermentingen | Deutschland/Germany Phone: +49 (7371) 500 - 0 | Fax: +49 (7371) 500 - 111 Mail: [email protected] | Web: www.paul.eu ------------------------------------------------------------------------------------------------------------------------------------------------ Kommanditgesellschaft, Sitz Duermentingen, Registergericht Ulm HRA 650073, Pers. haftende Gesellschafterin: Paul Maschinenfabrik GmbH, Sitz Riedlingen, Registergericht Ulm HRB 650013, GF: Werner Paul, USt-IdNr. DE146544409 -----Ursprüngliche Nachricht----- Von: etherlab-users [mailto:[email protected]] Im Auftrag von Tom Wong-Cornall Gesendet: Sonntag, 2. Februar 2020 08:54 An: [email protected] Betreff: Re: [etherlab-users] Beckhoff AX5000 - How to get rid of AX5801 safety card? On Sun, Feb 2 '20 at 19.53 NZDT, Hugh Sparks <[email protected]> wrote: > The drive came (from eBay) with a TwinSAFE option card: AX5801 > ... > So I powered down, removed the option card, and restarted. An error is > immediately displayed on the LCD: I don't have it in front of me, but the AX5000s ship with a dummy card that bridges a few pins together (perhaps hard-wiring what the pair of safety relays on the AX5801 do). I suspect the drive won't run without it. As this is not strictly on-topic for Etherlab, I'll send you off-list a picture of the dummy card tomorrow. I think I have one sitting on my desk at work. It would be trivial to replicate and bridge out the connector pins if you can't get hold of a dummy card easily. > P-0-2000 Configured safety option > ... > How can I get rid of the AX5801 so the drive will operate? You're on the right track with P-0-2000, but I think your best bet is to stick with the AX5801, especially as this is the `dumb' non-TwinSAFE card, so you just need to wire it up as per the manual. For the AX5801, I believe the correct value for P-0-2000 is 3. Sometimes the easiest way to figure this stuff out is to run the hardware from TwinCAT---it's a free download after all, no need to call up the local sales rep and feign interest like some other unnamed automation manufacturers. _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
