I've seen the same thing but not on a $75 Router/Switch. I know our Cisco 2600's have both an analog failover and an optional ISDN failover.
Looking at SMC's sight it looks like some of their routers do sport a com port (well I'll be damned....). I guess it just depends on which router he has. http://www.smc.com/index.cfm?sec=Products&pg=Barricade-Matrix&site=c Garl -----Original Message----- From: Linux Rocks ! [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 04, 2003 9:14 AM To: The Eugene Unix and GNU/Linux User Group's mail list Subject: Re: [eug-lug]Fun with Routers Im not sure about his router, but ive seen dsl routers that have a serial port specificly for hooking up a modem as backup/failsafe connection.. I belive if the dsl/cable goes down, the modem dials up... I think efn has a router like this in the office. Jamie On Wednesday 04 June 2003 03:59 pm, Grigsby, Garl wrote: : Not sure if anybody mentioned this yet or not, but the Dialing out section : on the router is probably for a DSL line. I would really doubt it there was : a way to connect an external analog modem to your router. : : The static IP is most certainly the answer. Most of the router/switches I : have seen have a way of turning off the built in DHCP server. That might : save you a world of pain. : : -----Original Message----- : From: BAGGAB [mailto:[EMAIL PROTECTED] : Sent: Tuesday, June 03, 2003 4:40 PM : To: The Eugene Unix and GNU/Linux User Group's mail list : Subject: RE: [eug-lug]Fun with Routers : : : Cory : : The SMC Barricade does have setting for dialing out to an ISP (that is: you : can set the user name, password, and other controls in the router) through : an UI that is brought up on a browser. Its pretty full featured. : : I will look over what you wrote. : : I am certain that static IPs are the answer. : : As you said this is an investment in time for understanding. : : I do understand that I am switching and not routing the two computers. : : I am sure you got it right, between the DHCP in the router and the DHCP in : the client computers, IPs are messed up. : : I really appreciate the time you took in detailing. I will get back to you : in a couple of days with what I've figured out. : : Brian : : -----Original Message----- : From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf : Of Cory Petkovsek : Sent: Tuesday, June 03, 2003 3:37 PM : To: The Eugene Unix and GNU/Linux User Group's mail list : Subject: Re: [eug-lug]Fun with Routers : : On Tue, Jun 03, 2003 at 03:11:47PM -0700, BAGGAB wrote: : > I have been playing with my Koppix / RH dual boot. : : It's spelled knoppix and pronounced k-nop-ix. : : > I finally concluded that the SMC Barricade router I am using is confusing : > the networking setup under Linux. : > : > Example: modem works fine till I hook up the router; then OS looks to : : router : : > rather then modem. : : Your smc router probably has a dhcp server in it, and you probably have : a dhcp client on your linux box, and the server is probably : reconfiguring your client's ip address and it is probably also setting : your default route: : : [EMAIL PROTECTED]:~$ route -n : Kernel IP routing table : Destination Gateway Genmask Flags Metric Ref Use : Iface : 10.0.0.0 0.0.0.0 255.255.0.0 U 0 0 0 : eth0 0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 : 0 eth0 : : > Setup: 2 PC's and a common KVM switch, 4 port router connecting 2 netgear : > NICs (2 ports empty,) nothing connected to WAN port (this worked when I : : had : : > DSL, so its o.k.,) modem port (this works with USR external 56K modem: : > windows o.k., Linux has problems that can be solved with router / modem : > reset, but return after a few minutes.) I get lost on all Linux : : conditions : : > (need a diagram and truth table to make my point.) Gave up on common : > Internet from modem through router to computers. : : This can be done, but is not plug and play. Your router probably is : plug and play, however your router cannot dial the modem for your isp. : You'd have the same problem with windows. : : > I now have a USR external : > 56K modem to each computer. I am trying, at least, to get the computers : > talking under Linux through the router. Ready to take axe to it! : : They should be able to talk to each other. For the record I doubt that : you are actually routing between the two computers. You probably have a : switch/router. The switch portion are the 4 ports, the router portion : is the wan uplink. If you had something there, then you would actually : be routing across two different ip networks. You should configure your : workstation network settings to use static ip addresses. Use : 192.168.0.100 and 192.168.0.101 for your two workstations. Then try : pinging from one to the other: : : ping 192.168.0.100 : : > Comment: under windows this works. Windows dumbs things down, where : : Linux's : : > sophistication requires network tweaking. : : No, it just needs understanding. Windows is simpler and can be easier : to understand for some things. However it can do less. : : > Problem: can I use a simple crossover cable till I sort this out? : : Yes, but I doubt this will fix your problem. Once you have your ips : straight, the switch should work just fine. : : > Conclusion: I know what your thinking: "I don't know - why don't you try : : it : : > bonehead." I am heading to the garage to get it now. : : Connection sharing requires you to setup one of your linux boxes as a : firewall/router. This is not an easy task to do it manually. I can do : it easily because I've invested a lot of time to figure it out. There : are, however distributions that have simple tools that set it up for : you. I'm pretty sure redhat has one, however I don't know where it is. : You can also use a dedicated firewall distro such as shorewall. : http://www.shorewall.net/ : : Here are your steps: : - Properly setup your ip addresses. Use static and 192.168.0.100 / 101. : Test with ping. : : - Setup one machine to be able to connect to the internet (192.168.0.100) : : - Setup that same machine as a firewall/router (using a distro tool). : : - Configure the other workstation to use the first (192.168.0.100) as : it's default gateway. : : Cory : _______________________________________________ : EuG-LUG mailing list : [EMAIL PROTECTED] : http://mailman.efn.org/cgi-bin/listinfo/eug-lug : : : _______________________________________________ : EuG-LUG mailing list : [EMAIL PROTECTED] : http://mailman.efn.org/cgi-bin/listinfo/eug-lug : : _______________________________________________ : EuG-LUG mailing list : [EMAIL PROTECTED] : http://mailman.efn.org/cgi-bin/listinfo/eug-lug -- We come to bury DOS, not to praise it. -- Paul Vojta, [EMAIL PROTECTED] _______________________________________________ EuG-LUG mailing list [EMAIL PROTECTED] http://mailman.efn.org/cgi-bin/listinfo/eug-lug _______________________________________________ EuG-LUG mailing list [EMAIL PROTECTED] http://mailman.efn.org/cgi-bin/listinfo/eug-lug