Shitting on your controller is probably better than pissing on it, but I would discourage either.
Thanks; Dennis Elsberry, MO http://www.evalbum.com/1366 http://www.evalbum.com/3715 -----Original Message----- From: ev-boun...@lists.evdl.org [mailto:ev-boun...@lists.evdl.org] On Behalf Of Drewcifer Sent: Tuesday, February 05, 2013 3:54 PM To: ev@lists.evdl.org Subject: [EVDL] Series and parallel switching Coul you use a Zolox Motor Speed Sensor Kit DL9-2171s or something similar to set up series and parallel switching? Could it be linked to a separate contractor to shit down the controller with out adversely affecting the motors? What else might one need to work with it? It Would be used in a 144v system with a Kelly 156vkdh 600a controller and two 9hp pm motors running separately off the single controller in a gear reduction system or through two 4-1ish differentials. Hope this makes sense couldn't find archive post about this! Stephen -- View this message in context: http://electric-vehicle-discussion-list.413529.n4.nabble.com/Series-and-parallel-switching-tp4661043.html Sent from the Electric Vehicle Discussion List mailing list archive at Nabble.com. _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
