Franki wrote on Wed, Nov 06, 2002 at 04:38:46AM +0800 : > > that index.cgi script is one I wrote that just prints different html pages > depending on the page name > passed to it via query string.... very very basic stuff, nothing even > remotely CPU intensive.
But could be disk intensive. High system loads are usually indicative of the I/O subsystem being much slower than the kernel is trying to push or pull information to/from it. > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX3: IDE controller on PCI bus 00 dev 09 > PIIX3: chipset revision 0 > PIIX3: not 100% native mode: will probe irqs later > PIIX3: neither IDE port enabled (BIOS) > CMD649: IDE controller on PCI bus 00 dev 68 > CMD649: chipset revision 2 > CMD649: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x7c30-0x7c37, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x7c38-0x7c3f, BIOS settings: hdc:pio, hdd:pio > hda: IC35L040AVER07-0, ATA DISK drive > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > hdc: BCD-48SB CD-ROM, ATAPI CD/DVD-ROM drive > ide0 at 0x7c20-0x7c27,0x7c1a on irq 11 > ide1 at 0x7c28-0x7c2f,0x7c1e on irq 11 > hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100) > hdc: ATAPI 44X CD-ROM drive, 128kB Cache > Uniform CD-ROM driver Revision: 3.12 > Partition check: > /dev/ide/host0/bus0/target0/lun0: [PTBL] [5005/255/63] p1 p2 < p5 p6 p7 p8 > p9 p10 p11 p12 p13 > Show me: cat /proc/ide/hda/settings rpm -q hdparm cat /etc/sysconfig/harddisks* Blue skies... Todd -- | MandrakeSoft USA | Sometimes you get what you want. | | http://www.mandrakesoft.com | Sometimes you get experience. | | http://www.mandrakelinux.com | --unknown origin | Cooker Version mandrake-release-9.1-0.1mdk Kernel 2.4.19-18mdkenterprise
msg60612/pgp00000.pgp
Description: PGP signature
