On Saturday 22 Mar 2003 9:22 pm, Peter Watson wrote: > > > I don't have anything for /dev/sda1 in fstab. Attempting to mount the > > > camera in the mount points section of the Mandrake Control Center and > > > adding the camera to fstab did not work for me when I tried to access > > > the card that way. > > > > > > I have attached a screenshot of my KDiskFree with the camera mounted > > > on /dev/sba1. I do not mount it as root, just as a user. And yes, > > > it is an xD card that I am using if that helps. > > > > I removed the fstab line and tried it your way, but the camera did not > > show up in KDiskFree. /proc/scsi/scsi gives me > > > > Attached devices: > > Host: scsi0 Channel: 00 Id: 05 Lun: 00 > > Vendor: CANON Model: IX-27025E Rev: 1.13 > > Type: Scanner ANSI SCSI revision: 02 > > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > > Vendor: MATSHITA Model: LS-120 VER5 00 Rev: F523 > > Type: Direct-Access ANSI SCSI revision: 02 > > Host: scsi2 Channel: 00 Id: 02 Lun: 00 > > Vendor: MITSUMI Model: CR-48X9TE Rev: 1.0C > > Type: CD-ROM ANSI SCSI revision: 02 > > Host: scsi3 Channel: 00 Id: 00 Lun: 00 > > Vendor: Model: Rev: > > Type: <NULL> ANSI SCSI revision: ffffffff > > > > Does knowing the scsi bus address help me at all? How can I use this > > info? > > > > Anne > > Anne > > I dont know if you have googled on this but I found a mail thread which > says that the S304 is only supported by kernel 2.4.20+, could this be > relevant > > Theres loads more threads but unfortunately there not in english
Ah - that sounds as though it may work in 9.1. I can wait, if that's the case. Thanks Anne -- Registered Linux User No.293302
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com