On Tue, 15 Jul 2003, Richard Bown wrote: > Bill I can discount the HD FD bit as I've force the link between the > cable modem to FD, surfboard SB3100 and the NIC to FD but I cant get any > faster than 10MB none of the 100MB settings work.
Probably because the hardware at the cable modem end cannot support 100Mb speed; not surprising, as even 10Mb is well over double even the fastest possible connection achievable[1] over a cable connection, and the most common plans will top out at 1.5-2Mb/s ... so there's not much need to put 100Mb HW into the modems. Perhaps if you force the NIC to 10Mb, you'll see some improvement? At least it won't bog down over any speed negotiations. [1] By "achievable", I mean under the current service plan offerings of the major cable players, not the actual capability of the wire itself. -- Bill Mullen [EMAIL PROTECTED] MA, USA RLU #270075 MDK 8.1 & 9.0 "In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move." - Douglas Adams
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com