Do a hardware reset. Turn off the power and disconnect it from the power source for 5-10 minutes.
If that doesn't do it, then you may have a blown SWR bridge diode. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Drax Felton Sent: Wednesday, May 18, 2011 7:51 PM To: [email protected] Subject: Re: [FlexEdge] Power Output Stuck at 5w Actually my external watt meter shows full power. The Fwd Power meter isn't going over 5w in PowerSDR. -----Original Message----- From: Drax Felton [mailto:[email protected]] Sent: Wednesday, May 18, 2011 7:46 PM To: [email protected] Subject: Power Output Stuck at 5w My output power seems to be stuck at 5w on the new RC with my 5000A. I have the Drive at 100. DIGU, I turned up the VAC TX Gain and the output power won't go above 5 watts. ATU tunes up the antenna fine. What do I need to look at? I already reset the database. KB3X, Drax _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
