Drax, Before you give up, be sure to check the output in the Tune position, which is where the RF output should be correct, any other position may not sample correctly..
73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: [email protected] <[email protected]> Web: www.flexradio.com <http://www.flex-radio.com> <a href="http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank"><img border="0" src=" http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/></a> On Wed, May 18, 2011 at 7:09 PM, Tim Ellison <[email protected]> wrote: > Do a hardware reset. Turn off the power and disconnect it from the power > source for 5-10 minutes. > > If that doesn't do it, then you may have a blown SWR bridge diode. > > > -Tim > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Drax Felton > Sent: Wednesday, May 18, 2011 7:51 PM > To: [email protected] > Subject: Re: [FlexEdge] Power Output Stuck at 5w > > Actually my external watt meter shows full power. > The Fwd Power meter isn't going over 5w in PowerSDR. > > -----Original Message----- > From: Drax Felton [mailto:[email protected]] > Sent: Wednesday, May 18, 2011 7:46 PM > To: [email protected] > Subject: Power Output Stuck at 5w > > > My output power seems to be stuck at 5w on the new RC with my 5000A. > I have the Drive at 100. DIGU, I turned up the VAC TX Gain and the output > power won't go above 5 watts. > ATU tunes up the antenna fine. > > What do I need to look at? I already reset the database. > > KB3X, Drax > > > > > > > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
![http://www.crossloop.com/images/badge-sm-gray.jpg"](http://www.crossloop.com/images/badge-sm-gray.jpg"){kind=link}