Hi Don, Here they are:
73, Ed W1PN Hi Howard > I have changed the settings on my NR and it is much better (TO ME anyway). > Here are my settings if you want to give them a try, I had a K3 for a few > months I liked the NR and ANF filters and these settings were very close > to > how the NR and ANF sounds on the K3. > Write down your original settings if you don't like the results these > settings give you. > Click on Setup, then DSP > NR > Taps: 40 > Delay: 30 > Gain: 15 > Leak: 10 > I also changed the "ANF" settings to my liking and here is what I like on > my > Radio's. > ANF > Taps: 68 > Delay: 60 > Gain: 25 > Leak: 1 > I have my "Buffer Size" set for > Phone > RX: 4096 > TX: 2048 > CW > RX: 4096 > Digital is at the defaults of 2048 > > IF you have to reset your Database then you will loose these settings and > they will go back to default's so you may want to save a Database. > Don't be afraid to play with the PowerSDR settings, it is a wonderful radio > and you really can't hurt anything. > I keep a Backup Database after each change I like so I can ALWAYS step > backward to the previous Database if something goes haywire. > > 73's and have a good evening > Bret > WX7Y On Fri, May 25, 2012 at 11:50 AM, Don <[email protected]> wrote: > If this was in an e-mail then I missed it. Would someone please tell me > where or what are the suggested NR settings? > > thank you > 73's > > Don, kd6hq > > -----Original Message----- From: Jim Jannuzzo > Sent: Friday, May 25, 2012 6:37 AM > To: [email protected] ; [email protected] > Subject: Re: [FlexEdge] Suggested NR Settings > > > > I'll second ( or third) that. I've played with the NR settings several > times, after reading the engineers' descriptions of taps and leaks and all > the rest. But the "Bret Settings" have added a new effective NR > functionality to the radio. I find that NB2 kills my noise on 15M, and > selective use of NR helped in several instances last night. I swear that > the NR buttons on some other radios function by merely turning down the > treble. Jim KJ2P > >> Date: Thu, 24 May 2012 22:54:41 -0400 >> From: [email protected] >> To: [email protected] >> Subject: [FlexEdge] Suggested NR Settings >> >> Bret, >> Thank you for the suggested settings of the NR function. I tried them and >> found >> that they are very effective on the type of noise that has been hampering >> me for several >> years. I had not tried the lower values that you put forth and was >> pleasantly surprised by the results. >> It is the openness of the Flex owners and FlexRadio Systems that make the >> difference in the radios !!! >> Thanks again for your knowledge. >> Doug K4DMH >> A Happy Flexer for over 1 year. >> >> ______________________________**_________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software development and >> experimentalist who are using beta versions of the software. >> > > ______________________________**_________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > > ______________________________**_________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
