Any reason the psdr software couldn't do this as well
On 7/8/12, Stan Williams <[email protected]> wrote: > Does the new hardware have, or can be made to have, the ability to send a > pulse down any of the antenna connectors and: > > a) Monitor the reflections and display the results as a time-domain > reflectometer at a base frequency of choice (any frequency on which the > 6000 > may transmit) . Providing the power is low enough the receiver can stay on > to "see" the sent pulse and reflected signals; then graph the reflections > on > a time or distance basis. This will permit exact real-time measurement of > off-centre fed antennae as well as feed line analysis and balun impedance > matching. Velocity factor if a bare wire is paralleled with a test cable > and the difference in reflected time represents the velocity factor. > > b) Perform the function of a graphic antenna analyzer by sending a > series of very short bursts (several cycles on each frequency) and graph > the > results with SWR and impedance. The user selects scan centre frequency and > scan width. > > > > Stan Williams > VE3FLW > FlowBased Solutions Inc. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > -- Sent from my mobile device _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
