the Kahcina 505dsp used to have it we taking many many years ago , but the qustion how many time you be using it ,there is many analzer on the market you can buy and will do good job as well if the flex will add it this somting they have to think about or may be they can add it as exta cost if some one like to have it .
vy 73 E.P g0uut/dl9fcc From: Steven Catani <[email protected]> To: Stan Williams <[email protected]>; [email protected] Sent: Tuesday, 10 July 2012, 1:26 Subject: Re: [FlexEdge] Flex 6000 series - Antenna analyzer and time-domain reflectometer Any reason the psdr software couldn't do this as well On 7/8/12, Stan Williams <[email protected]> wrote: > Does the new hardware have, or can be made to have, the ability to send a > pulse down any of the antenna connectors and: > > a) Monitor the reflections and display the results as a time-domain > reflectometer at a base frequency of choice (any frequency on which the > 6000 > may transmit) . Providing the power is low enough the receiver can stay on > to "see" the sent pulse and reflected signals; then graph the reflections > on > a time or distance basis. This will permit exact real-time measurement of > off-centre fed antennae as well as feed line analysis and balun impedance > matching. Velocity factor if a bare wire is paralleled with a test cable > and the difference in reflected time represents the velocity factor. > > b) Perform the function of a graphic antenna analyzer by sending a > series of very short bursts (several cycles on each frequency) and graph > the > results with SWR and impedance. The user selects scan centre frequency and > scan width. > > > > Stan Williams > VE3FLW > FlowBased Solutions Inc. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > -- Sent from my mobile device _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
