Ken,
The internal ATU is only in the TX signal chain, so it is not connected
to either SCU. Remember, the SCU is a wide band RF spectrum ADC, so if
you are transmitting on one frequency, you still have the ability to
receive on the other slice receivers defined on that SCU or other SCU in
the case of the FLEX-6700.
There are (2) SO-239 transceiver connectors on both the FLEX-6500 and
the FLEX-6700. The FLEX-6500 has one RX in/out loop that can be
assigned to it's SCU and the FLEX-6700 has two RX in/out loops for it's
two SCUs. SCUs can be assigned to a RX only or a transceiver port.
I suspect that the manual will not be available until the software is
available.
In regards to the needed "Support Group" to help manage SWS (SDR
Withdrawal Syndrome), we have been selling a few FLEX-1500s to help
bridge the gap. ;-)
Tim Ellison
On 8/11/2012 12:07 PM, Ken Buser wrote:
To Tim, or someone at Flex
I have on order a Flex 6700 and am planning for what I believe will be
necessary in the order of external Antenna switching.
I have designed and am in the process of building an Antenna Matrix which will
allow for any of 5 Antennas to be connected to either of the 2 SCU's.
There will be Pic Processor control which will stop any invalid connection,
Like more than 2 Antennas selected or more than one connected to the same SCU.
My External Antenna Tuner, Amp, and Power Master unit can be put in line
with either of the SCU's. or not used at all.
In the process I started thinking about the Internal ATU.....
Can it be used with either SCU ???
Will it keep settings if I were to switch transmitt from one SCU to the other
on different Bands ?
Also I assume the 6500 only has one SO239 connector on its SCU on the rear....
Will we be able to see a Manual some time before the first units start shipping
in Q4 ??
I think we need a support group for those of us that have sold their Flex's and
are now FlexLess until the new 6000 series arrives hi hi
73's Ken W9IE
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
