I believe there is planned to have steppir control ultimately available on the 6000 series. They had it working at the Visalia show this year (along with controlling an Alpha 9500 if my memory is correct).
Stay tuned as they say! 73 Neal Campbell Abroham Neal LLC On Fri, Jul 26, 2013 at 12:17 PM, <[email protected]> wrote: > Hi Al, > > Robin and I are working to get his SteppIR working with his 6700.... > > Dennis KØEOO > > > > ----- Original Message ----- > From: "Al K0VM" <[email protected]> > To: [email protected] > Sent: Friday, July 26, 2013 11:13:54 AM > Subject: Re: [FlexEdge] Steppir and 6700. > > Robert, > Since the 6700 does not have any rs232 support I doubt that you can > make a direct connect that would drive the Step IR. I believe that > those that are using the 6700 with Step IR are using a connection to the > PC... > I'm not sure how many 6K folks are on this list. You might get a > better answer on the preview list. > > AL, K0VM > ( I have a 65090 but no StepIR ) > > On 7/23/2013 1:12 PM, Robin Haighton wrote: > > I recently purchased and installed a 3 element stepp ir antenna. A > fantastic improvement on my previous Cushcraft A3. However now I have a > flex6700 which should be able to adjust the Steppir as I change Band and > frequency. The new antenna came with two "S12"cables which I presume are to > directly connect the 6700 to the Steppir controller. Can anyone confirm > that this is a direct connection or do I need to go through another device > such as a computer serial port? > > Any advice or experience would be very welcome. > > I also have a flex 3000 can I use the same cable or do I need a > different one? > > > > 73 > > Robin Haighton VE3FRH > > > > > > > > > > > > Sent from my iPad > > _______________________________________________ > > Flexedge mailing list > > [email protected] > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software innovation and other > technical SDR topics. > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software innovation and other > technical SDR topics. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software innovation and other > technical SDR topics. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
