Joe, I don't think that the driver got fully installed. On XP you should get 3 "Found New HW" Wizards.. Best way to get it reinstalled is the go to Windows Device Manager, uninstall the FireWire controller under the 1394 IEEE line. Then reboot and make sure the radio is off. Once rebooted, the FW controller is Ready to Use, then turn the radio on and answer the 3 wizards.. This should now have the FW driver completely installed. Before you start PowerSDR, open the FW driver (Flex Radio icon on the desktop) and set the buffer to 2048 (same as the default setting in PSDR)
Hopefully PSDR will now come up for you.. 73, Dudley WA5QPZ ---- "Sanger wrote: > i will try to give it a shot .... i am not sure how to use the svn ... i know > there is an article on it in the knowledgebase .... guess it's time to roll > up my sleeves and jump in! > > ________________________________________ > From: Dale Boresz [...@lightstream.net] > Sent: Saturday, May 09, 2009 9:55 PM > To: Sanger, Joseph > Cc: flexradio@flex-radio.biz > Subject: Re: [Flexradio] Flex-3000 installation problem > > Hello Joseph, > > I had a similar situation here with my Dell laptop, but have found that > the code from the test branch is now working fine with the FLEX-3000. > I'd suggest that you try code from this branch (keeping in mind this IS > the test branch, so expect to see some bugs - and other undocumented > features...): > > svn://206.216.146.154/svn/repos_sdr_windows/PowerSDR/branches/test/bin/Release > > 73, Dale > WA8SRA > > > > > Sanger, Joseph wrote: > > Thanks, Neal, for the tip. > > > > The Flexradio Driver does indicate that it sees the Flex-3000. > > In Device Manager, I do see Flex listed as one off the Sound, video and > > game controllers > > > > Guess this is good news ... but ... what next? I have uninstalled and > > reinstalled SDR software once or twice already. > > > > ________________________________________ > > From: Neal Campbell [nealk...@gmail.com] > > Sent: Saturday, May 09, 2009 3:52 PM > > To: Sanger, Joseph > > Cc: flexradio@flex-radio.biz > > Subject: Re: [Flexradio] Flex-3000 installation problem > > > > Run the Driver software and see if it sees the 3000. Also you can look > > in your device manager under soundcards and see if it lists the 3000. > > If not, you are not talking to it. > > > > Neal Campbell > > Abroham Neal Software > > Programming Services for Windows, OS X and Linux > > www.abrohamnealsoftware.com > > (540) 242 0911 > > > > > > > > > > On Sat, May 9, 2009 at 3:49 PM, Sanger, Joseph <joseph.san...@nyumc.org> > > wrote: > > > >> Can't seem to get my laptop to recognize my new Flex-3000. > >> I have installed a Belkin Firewire Express card on my Dell XPS M1710 > >> running Windows XP ... it is indeed recognized by the laptop computer when > >> inserted ... makes that nice two-tone 'hardware found' sound. > >> I have disabled the native motherboard flex port. > >> I have installed the Flex Driver as per the instructions with no problems. > >> When i power on the Flex-3000, i hear the 'hardware recognized' tones > >> .... but when i run SDR 1.18.0, after about 25 seconds is says > >> 'communications error' in a dialog box .. and then brings up the first > >> page of the wizard which DOES NOT have the flex-3000 on it, just the > >> flex-5000. > >> Any help would be greatly appreciated! Thanks. > >> > >> Joseph Sanger, M.D. > >> Associate Professor of Radiology > >> Director, Radiology Informatics > >> (212) 263-3434 > >> > >> </PRE> > >> <html> > >> <body> > >> ------------------------------------------------------------<br /> > >> This email message, including any attachments, is for the sole use of the > >> intended recipient(s) and may contain information that is proprietary, > >> confidential, and exempt from disclosure under applicable law. Any > >> unauthorized review, use, disclosure, or distribution is prohibited. If > >> you have received this email in error please notify the sender by return > >> email and delete the original message. Please note, the recipient should > >> check this email and any attachments for the presence of viruses. The > >> organization accepts no liability for any damage caused by any virus > >> transmitted by this email.<br /> > >> ================================= > >> </body> > >> </html> > >> <PRE> > >> _______________________________________________ > >> FlexRadio Systems Mailing List > >> FlexRadio@flex-radio.biz > >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > >> Knowledge Base: http://kc.flex-radio.com/ Homepage: > >> http://www.flex-radio.com/ > >> > >> > > > > ------------------------------------------------------------ > > This email message, including any attachments, is for the sole use of the > > intended recipient(s) and may contain information that is proprietary, > > confidential, and exempt from disclosure under applicable law. Any > > unauthorized review, use, disclosure, or distribution is prohibited. If you > > have received this email in error please notify the sender by return email > > and delete the original message. Please note, the recipient should check > > this email and any attachments for the presence of viruses. The > > organization accepts no liability for any damage caused by any virus > > transmitted by this email. > > ================================= > > > > > > _______________________________________________ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > Knowledge Base: http://kc.flex-radio.com/ Homepage: > > http://www.flex-radio.com/ > > > > > > ------------------------------------------------------------ > This email message, including any attachments, is for the sole use of the > intended recipient(s) and may contain information that is proprietary, > confidential, and exempt from disclosure under applicable law. Any > unauthorized review, use, disclosure, or distribution is prohibited. If you > have received this email in error please notify the sender by return email > and delete the original message. Please note, the recipient should check this > email and any attachments for the presence of viruses. The organization > accepts no liability for any damage caused by any virus transmitted by this > email. > ================================= > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
