Thanks VERY much.
Mark Lunday WD4ELG wd4...@arrl.net http://wd4elg.net -----Original Message----- From: Tim Ellison [mailto:telli...@itsco.com] Sent: Tuesday, June 02, 2009 8:53 PM To: Mark Lunday; 'Steven O'Neal'; 'Flex' Subject: RE: [Flexradio] How to force IRQ's (Question) "Using v1.18, but I don't see F3K as an option, only SDR1000, F5K, and demo. Something I am doing wrong?" [Tim] No, you are not. You don't have a FLEX-3000 connected to the computer so it doesn't show up. The F5K is there by default. The F3K must be identified by the driver before it is an option. "What is DPC check, and how do I run it? Sounds like an important parameter..." [Tim] Search the Knowledge Center for it http://kc.flex-radio.com/Search.aspx?Keywords=DPC (the first "hit") -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark Lunday Sent: Tuesday, June 02, 2009 8:24 PM To: 'Steven O'Neal'; 'Flex' Subject: Re: [Flexradio] How to force IRQ's (Question) Hoo boy. I would also like to tune up my system. 1. I see my Firewire card is IRQ 17. Where do I go to look for conflicts? 2. Using v1.18, but I don't see F3K as an option, only SDR1000, F5K, and demo. Something I am doing wrong? 3. What is DPC check, and how do I run it? Sounds like an important parameter... Thanks Mark Lunday WD4ELG wd4...@arrl.net http://wd4elg.net -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steven O'Neal Sent: Tuesday, June 02, 2009 8:11 PM To: Flex Subject: [Flexradio] How to force IRQ's (Question) I'm tuning up my system in anticipation of the arrivial of my new Flex 3000 and have a question about forcing IRQ's. Seems my Video card and my Firewire card are sharing an IRQ, number 16. When I go into control panel the settings for the firewire card are greyed out, Plug and Pray? Firing up the Flex Firewire driver and running with DPC check enabled, I'm pretty low, but getting a peak of 1724 us after about 5 minutes of run time. Normal is around 6 to low 100's on delay. So question is, anyone know how to force the IRQ of my Firewire up to something like IRQ 18. I have not triied the shutdown and move the card to a different slot, and Bios does not seem to offer any options to tweak. Comments suggestions. _________________________________________________________________ Lauren found her dream laptop. Find the PC that's right for you. http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290 _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/