Look like you found the fix. The AGC was improved in the 1.18.x releases so this making this parameter change is very reasonable.
-Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Frank Mayer Sent: Saturday, June 20, 2009 4:22 PM To: Frank Mayer; flexradio@flex-radio.biz Subject: Re: [Flexradio] 1.18.1 Audio Limiting A point of interest. I am able to stop this audio limiting effect on AM by reducing the AGC-T control from the nominal setting of 90 to 60 and below, depending on the strength of the RX signal. This was unnecessary previously in 1.16.2 and earlier. ----- Original Message ----- From: Frank Mayer To: flexradio@flex-radio.biz Sent: Saturday, June 20, 2009 3:35 PM Subject: 1.18.1 Audio Limiting Audio limiting on AM and SAM receive very evident in the new release, just like it was in the previous release 1.18.0 with the SDR-1000. This issue started with the SVN test branch, SVN 2797 when the changes were made to the AGC. Frank, WA3JBT _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/