Earl, The drivers ARE signed starting with version 3.4.0.5254. There is something wrong with your PC where after the drivers are installed they appear to the OS as being unsigned.
To verify this, right click on C:\windows\system32\drivers\FlexRadio.sys and select Properties. 1.) Select the digital signatures tab to view the signature list. Select the TC Applied Technology signature and click Details. It will tell you the signature is OK. You can also check the other two drivers that start with FlexRadio*.sys. They are signed too. -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Earl Richardet Sent: Saturday, September 05, 2009 7:53 PM To: 'Dudley Hurry' Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Difficulties with my 64 bit firewire drivers Hi Dudley, Well that didn't appear to work. I ran the install with administration privilages and still won't work properly.. So I investigated further and It appears that I have to push f8 on every boot up.. Because the drivers are not signed, my system won't allow them unless I disable driver signature enforcement on every boot up. Something told me that the firewire drivers were signed now for 64 bit, but maybe not. However, we were able to get it to work without f8 previous to my restore of the Gateway FX system. Any further ideas? EARL VE7QJ -----Original Message----- From: Dudley Hurry [mailto:jhu...@austin.rr.com] Sent: September-03-09 8:36 PM To: Earl Richardet Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Difficulties with my 64 bit firewire drivers Earl, The next time you install, be sure to reboot before re-installing, and when you re-install be sure to right click on the executable and "Run as Administrator" for the install.. See if that corrects the issue. 73, Dudley WA5QPZ Earl Richardet wrote: > Hello Dudley or Tim > > I've just recently restored my 64bit windows vista PC. I have been > able to re-install the 64bit firewire drivers and I can get the radio to work, however, every now and then (seems like after system reboots) when I turn on the radio, I hear the driver sounding 3 quick beeps to the speakers and then of course the firewire doesn't connect to the radio. > > I'm able to correct the problem by disabling the digital signature > during boot up and re-install the firewire software until the next time I reboot without disabling the digital signature. > > The firewire version I'm using is 3.4.0.5254 Any suggestions?? > > EARL VE7QJ > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ Message delivered to jhu...@austin.rr.com > > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com