Brett,
You have to be kidding.. Right? I can view a AM signal, even tell the
audio response on each sideband, exactly if I move the cursor over the
signal and read the frequency response in the lower left of the panadapter.
You can monitor your AM signal in the Flex 5000 with the RX2 option,
view it in the lower panadapter.
I will tell you that the panadapter does take a lot of CPU to display,
so if you are having to slow the display refresh down, this will cause
the display to be less reactive.
73,
Dudley
WA5QPZ
Brett Gazdzinski wrote:
Well, I have put the 5000a through its paces, and have some questions.
The panadaptor and scope displays seem very poor, I am used to being
able to see signals much more pronounced, I have adjusted the scale
and other options with no improvement.
Its hard to see (on the panadaptor) how wide an AM signal is, the
scope display does not show the carrier with modulation, and another
odd thing, when an AM signal stops talking, the noise level goes up,
unlike a normal AM receiver where the carrier quiets the receiver even
with no speech.
I can adjust the agc and improve things but it seems to need
adjustment for various signal strengths, where a normal receiver
handles weak and strong signals without any adjustemt needed....
I spent a lot of time compairing the homebrew receiver to the flex,
and the homebrew seems much better in most respects.
I am a little disapointed in the displays on the flex, the resolution
seems very poor, or is there something I am overlooking?
Also, there is no way I can monitor my outgoing audio, because its so
delayed, even if I make the buffers as small as is allowed. That is
partly a slow PC I guess...
Brett
N2DTS
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to jhu...@austin.rr.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to arch...@mail-archive.com