On Thu, Oct 1, 2009 at 5:25 PM, Brett Gazdzinski <brett.gazdzin...@verizon.net> wrote: > If you change from 1db per division, to 10 db per division, the signal > should not stay the same size..... > What is the point of being able to adjust it?
Ah, you need to change the lower ("Min:") and upper ("Max:") bound on the pan display to change the range, not the step size. Step size only changes the grid scale. I normally have the lower bound set at about -130dBm depending on the noise level in the band. On 40m I normally run with a lower bound of -120dBm. I set the upper bound to -40dBm. That spreads the signals out vertically. There just aren't many signals that can hit -40dBm. -- 73 de Brian, WB6RQN/J79BPL _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com