Hi Tim I never even new to check that the buffer were the same size ... they weren't. Is a simple check by PowerSDR upon startup to check for equal buffer size something that could / should be added in the future?
Thanks, Kevin -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison Sent: Monday, November 02, 2009 8:55 AM To: dan edwards; flex list flex flex list Cc: dudley at flex Subject: Re: [Flexradio] [SPAM] cw images First of all, you have a buffer mismatch. The Firewire buffers and the PowerSDR audio buffers must be the same to keep them "aligned". Make this change and see what happens. Second, you probably are not doing anything wrong. If you are using the released versions of PowerSDR v1.18.x, this version does not have the improved wide band image rejection (WBIR) algorithms. That code is in the experimental version in the SVN TEST and PB-PAL branches. Depending where in the band the strong signals are located (how far from the calibration point), there could be images from strong signals heard in the RX passband. -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of dan edwards Sent: Monday, November 02, 2009 7:56 AM To: flex list flex flex list Cc: dudley at flex Subject: [SPAM] [Flexradio] cw images Importance: Low with fairly stong signals, say S 9 +20, or -50 dbm, i can hear extra images, or a ragged ac buzz, several places above and below the center frequencies. it seems the effectiveness of the narrower cw filters is negated by these spurrs.... these are good clean loud cw sigs on 160m. single signals.. att on. nb off. latency under 400 uSec. current firewire, firmware, powerSDR. sampling 96 khz, buffers 576, pwrSDR audio buffer 512, dsp rx buffers 4096. 3 ghz dual core cpu, with firewire on non shared IRQ. flex 3000. so, what am i doing wrong? this wont do for a cw dx contest !!!! 73, w5xz _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to ve...@cogeco.ca No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.423 / Virus Database: 270.14.44/2475 - Release Date: 11/01/09 19:39:00 _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
